HR 7784

0likes☆Favorite🔕SubscribeShare

Introduced ↻ Update bill dataRe-checks Congress.gov for new actions and updates the bill's status, and fills in any sponsors, committees, or related bills that are missing. It does not re-pull sponsors/cosponsors/committees/related — those rarely change — and it skips all work if nothing has changed upstream, so it's cheap to click. Contact your reps Urge the sponsor

IN THE HOUSE OF REPRESENTATIVES

March 4, 2026

Ms. Titus introduced the following bill; which was referred to the Committee on Transportation and Infrastructure

A BILL

To amend title 49, United States Code, to establish requirements regarding visual and automated track inspections, and for other purposes.

Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled,

SECTION 1. SHORT TITLE.

This Act may be cited as the “Secure Tracks Act”.

SEC. 2. TRACK INSPECTIONS.

(a) In General.—Subchapter II of chapter 201 of title 49, United States Code, is amended by adding at the end the following: “Sec. 20172. Visual and automated track inspection requirements

“(a) Minimum Frequency for Visual Track Inspections.—All main line track designated for operation at Class 3 track speeds or higher under section 213.9 of title 49, Code of Federal Regulations, as in effect on January 1, 2026, shall be subject to visual inspection by a qualified inspector not less frequently than twice each week, with at least 1 calendar day between each inspection.

“(b) Immediate Remediation of Safety Defects.—Any defect or unsafe condition identified by any inspection, detection, or monitoring method shall be corrected, protected, or removed from service immediately upon detection, consistent with the requirements of part 213 of title 49, Code of Federal Regulations, as in effect on January 1, 2026.

“(c) Remediation by Qualified Person.—If a qualified inspector making a track inspection under this section finds a deviation from the requirements of part 213 of title 49, Code of Federal Regulations, as in effect on January 1, 2026, the qualified inspector shall—

“(1) immediately initiate remedial action; and

“(2) have the sole authority to authorize any subsequent movements to facilitate repairs on track that is out of service.

“(d) Prohibition on Granting Waivers That Reduce Safety Coverage.—Notwithstanding any other provision of law, including section 20103 of this title, the Secretary of Transportation may not grant a waiver, exemption, or modification of any safety regulation issued under chapter II of subtitle B of title 49, Code of Federal Regulations, as in effect on January 1, 2026, if the proposed alternative inspection, detection, or monitoring method fails to identify or detect all defect conditions defined or recognized as unsafe under applicable Federal Railroad Administration regulations.

“(e) Automated Track Inspection Requirements.—Not later than 1 year after the date of the enactment of this section, the Secretary shall update subparts F and G of part 213 of title 49, Code of Federal Regulations, to require that a Track Geometry Measurement System operate over the following track classifications at the following frequencies and be subject to the following requirements regarding TGMS inspections:

“(1) For operations at a qualified cant deficiency (Eu) of more than 5 inches on Classes 1 through 5 track, at least 4 times per calendar year, with at least 43 days elapsing between TGMS inspections.

“(2) For Class 1 track operating more than 15,000,000 gross tons annually, at least once per calendar year, with at least 170 days elapsing between TGMS inspections.

“(3) For Class 2 track—

“(A) operating 15,000,000 or fewer gross tons annually, at least once per calendar year, with at least 170 days elapsing between TGMS inspections; and

“(B) operating more than 15,000,000 gross tons annually, at least twice per calendar year, with at least 120 days elapsing between TGMS inspections.

“(4) For Class 3 track—

“(A) operating 15,000,000 or fewer gross tons annually, at least twice per calendar year, with at least 120 days elapsing between TGMS inspections; and

“(B) operating more than 15,000,000 gross tons annually, at least 3 times per calendar year, with at least 90 days elapsing between TGMS inspections.

“(5) For Class 4 track—

“(A) operating 15,000,000 or fewer gross tons annually, at least 3 times per calendar year, with at least 90 days elapsing between TGMS inspections; and

“(B) operating more than 15,000,000 gross tons annually, at least 4 times per calendar year, with at least 43 days elapsing between TGMS inspections.

“(6) For Class 5 track, at least 4 times per calendar year, with at least 43 days elapsing between TGMS inspections.

“(7) For Class 6 and Class 7 track, at least twice during any 120-day period, with at least 25 days elapsing between TGMS inspections.

“(8) For Class 8 track, at least twice during any 60-day period, with at least 12 days elapsing between TGMS inspections.

“(9) For Class 9 track, at least twice during any 30-day period, with at least 6 days elapsing between TGMS inspections.

“(10) For crossovers where the track speed is more than 30 miles per hour, at least twice per calendar year, with at least 120 days elapsing between TGMS inspections.

“(f) Fixing Deviation Requirements.—Not later than 1 year after the date of the enactment of this section, the Secretary shall update part 213 of title 49, Code of Federal Regulations, as in effect on January 1, 2026, to require that when any inspection, whether done by a qualified inspector or by a machine (including a TGMS machine), finds a deviation from the requirements of this part, the qualified inspector or other authorized personnel shall immediately remediate the deviation in accordance with such part.

“(g) Applicable Requirements.—The Secretary shall ensure that any requirements of subparts F and G of part 213 of title 49, Code of Federal Regulations, as in effect on January 1, 2026, including section 213.333 of such part, generated by an update to the regulations made pursuant to subsection (e) or (f) are applied to the applicable track classification.

“(h) Definitions.—In this section:

“(1) Class 1 track; class 2 track; class 3 track; class 4 track; class 5 track.—The terms ‘Class 1 track’, ‘Class 2 track’, ‘Class 3 track’, ‘Class 4 track’, and ‘Class 5 track’ means Class 1 track, Class 2 track, Class 3 track, Class 4 track, and Class 5 track, respectively, as such terms are used in section 213.9(a) of title 49, Code of Federal Regulations, as in effect on January 1, 2026.

“(2) Main line.—The term ‘main line’ has the meaning given such term in section 236.1003 of title 49, Code of Federal Regulations, as in effect on January 1, 2026.

“(3) Qualified inspector.—The term ‘qualified inspector’ means a person designated as a qualified person to inspect track for defects under section 213.7(b) of title 49, Code of Federal Regulations, as in effect on January 1, 2026.

“(4) Track geometry measurement system; tgms.—The terms ‘Track Geometry Measurement System’ and ‘TGMS’ means a Track Geometry Measurement System as such term is used in section 213.333 of title 49, Code of Federal Regulations, as in effect on January 1, 2026.”.

(b) Clerical Amendment.—The analysis for chapter 201 of title 49, United States Code, is amended by adding at the end the following:

“20172. Visual and automated track inspection requirements.”. <all>